Single-model review
VASAGLE UHSR415 hall tree with mirror
Coats, shoes, a seat and the mirror an entryway usually has to hang separately — from one run of wall, at the cost of nearly fourteen inches of floor depth.
#ad — We earn a commission from qualifying purchases made through the Amazon links on this page, at no extra cost to you. It does not change what we recommend or the order we rank it in. Full disclosure.

The verdict
Buy this if your entry has no mirror and a wide wall to spare. It is the only hall tree we rank with an integrated mirror, its mesh shelves are rated at 33 lb against 11 lb for fabric-drawer rivals, and the bench is published at 220 lb. At 13.8 inches deep it is also the deepest hall tree here.
A mirror by the front door is the thing almost every entryway wants and almost no entryway has room to hang, because the wall that would take it is the wall the coats are on. Integrating the two is a genuinely useful idea rather than a feature-list entry, and this is the one piece on this site that does it.
Does it fit your hallway?
This is where the piece asks the most of you. At 13.8 inches (35 cm) deep it leaves 22.2 inches of walking room in a hallway at the 36-inch code minimum — under the 24 inches at which two people pass each other comfortably, and that is before anyone hangs a winter coat on it. A hanging coat adds another three to five inches of effective depth at shoulder height.
So the honest answer: this belongs in an open entry, a foyer or a hallway of 42 inches or more. In a code-minimum corridor it will work and you will resent it every day in January.
Width needs 38.6 inches plus tolerance — call it 40 inches of clear run measured at about 20 inches off the floor, which is the band where skirting, radiator pipes and door casings live. Height is 70.9 inches (180 cm), so check for a stair soffit, a boxed pipe run or a sloped ceiling at the exact spot it will stand, and allow a couple of inches to tilt it upright after assembly.
The numbers it publishes, and the one it does not
VASAGLE publishes three load figures for this piece, which is more than most makers in the category manage: 220 lb (100 kg) static on the bench, 33 lb (15 kg) on each mesh shelf, and 11 lb (5 kg) on each hook.
The 33 lb shelf rating is the one worth pausing on. Hall trees at this price commonly use fabric drawers rated at 11 lb, which hold hats, gloves and a scarf and are not really for shoes. A steel mesh shelf at three times that rating holds boots — and because it is mesh, it holds wet boots without sealing the damp against them, which is the failure mode of every closed hall-tree cubby.
The 11 lb hook rating is the category norm and it is worth reading literally. A dry wool coat is around 3 to 4 lb; a waxed cotton jacket carrying rain is comfortably over 8. Eleven pounds is a real ceiling on a wet winter day, not a theoretical one.
What VASAGLE does not publish is the mirror's own dimensions. That is a genuine gap, because the entire reason to choose this model over a cheaper hall tree is the mirror, and how much of you it shows is unknown until the box is open. If a full-length reflection is the point, ask the seller before ordering.
Hook height, which nobody checks
The hooks on a hall tree sit where the frame puts them, and on a 70.9-inch unit that is typically somewhere between 55 and 65 inches from the floor. Published guidance puts adult hooks at 60 to 65 inches and children's at 36 to 42, and the 2010 ADA standards cap an unobstructed forward reach at 48 inches.
The consequence is simple and worth knowing before you buy rather than after: on this piece, as on every hall tree, young children cannot reach the hooks and neither can a seated wheelchair user. If either of those describes your household, a hall tree plus a low hook rail at 36 to 42 inches is the arrangement that actually works, and our hooks guide covers how to plan it.
Assembly and stability
The piece is particleboard on a steel frame and ships with two anti-tip kits. Two rather than one is a signal about the intended fixing: a 70.9-inch unit on a 13.8-inch base is a lever, and the load goes on at the top where the coats are. Fix it into studs or into cavity anchors rated for the load. A plasterboard plug that holds a picture will not hold this once it has started to move, because at that moment the force is a lever rather than a hanging weight.
What we did not do
We have not assembled this hall tree, hung anything on it, or seen the mirror. Everything above comes from VASAGLE's published specification for the UHSR415 and from published guidance on hook heights and hallway widths, with our arithmetic labeled where it appears. The mirror dimensions are not published and are not estimated here. Availability was checked before publishing: the model is currently listed on Amazon in the Rustic Brown and Black colorway.
The unit in question
The full specification, figure by figure
Top pick
Entries with no mirrorVASAGLE Hall Tree with Mirror and Mesh Shelves (UHSR415)
The widest hall tree here at 38.6 in, with 33 lb mesh shelves and the mirror an entryway usually has to hang separately.
Key dimensions
- Width
- 38.6 in (98 cm)
- Depth
- 13.8 in (35 cm)
- Height
- 70.9 in (180 cm)
- Depth band
- Standard
Footprint 38.6 x 13.8 x 70.9 in (98 x 35 x 180 cm). Adult shoes flat, heel to toe.
Full specification
Source: Published 13.8 D x 38.6 W x 70.9 H in, 11 lb per hook and 33 lb per mesh shelf, VASAGLE UHSR415B01 listing.
What the specs support
- 33 lb per mesh shelf is triple the fabric-drawer models
- Integrated mirror saves a separate fixing and a separate purchase
- Mesh shelves ventilate wet shoes
- 38.6 in of storage width is the most here
Limitations
- 13.8 in (35 cm) is the deepest hall tree in this roundup
- The mirror's own dimensions are not published, so how much of you it shows is unknown until it arrives
- 38.6 in wide plus 13.8 in deep is a serious commitment of hallway
Skip this if
Your hallway is at the 36 in minimum. This is nearly 14 in deep and would leave 22 in of walkway.
Who it is forA wide entry or foyer that currently has no mirror, where a single piece should do coats, shoes and a last look before leaving.
Frequently asked
Questions people actually ask
How deep is the VASAGLE UHSR415 hall tree?
13.8 inches (35 cm), the deepest hall tree we rank. In a 36-inch hallway that leaves 22.2 inches of walkway, below the 24 inches two people need to pass — before a hanging coat is counted.
What weight does the bench hold?
A published 220 lb (100 kg) static load. Each mesh shelf is rated at 33 lb (15 kg) and each hook at 11 lb (5 kg).
How big is the mirror?
VASAGLE does not publish the mirror's dimensions, which is a real gap on a model whose main selling point is the mirror. If a full-length reflection matters, ask the seller before ordering.
Can wet boots go on the mesh shelves?
Yes, and that is the point of mesh. Open steel shelving lets air at a wet boot instead of sealing moisture against it, which is what causes odor in closed hall-tree cubbies. The 33 lb rating is high enough for boots.
Does it need to be fixed to the wall?
Yes. It is 70.9 inches tall on a 13.8-inch base and ships with two anti-tip kits. Fix into studs or load-rated cavity anchors; a standard plasterboard plug will not hold it.
Can children reach the hooks?
No. Hall tree hooks sit where the frame puts them, typically 55 to 65 inches up, against published guidance of 36 to 42 inches for children. Add a low hook rail if children hang their own coats.
Sources
Where these figures came from
- International Residential Code minimum hallway width — 36 in minimum for a residential hallway; 36 to 42 in typical, 42 to 48 in comfortable.
- Coat hook height reference — 60 to 65 in for adults, 66 in builder standard, 36 to 42 in for children, 54 to 60 in in an entryway or mudroom, and 24 to 30 in above a bench seat.
- 2010 ADA Standards for Accessible Design, Section 308 — Unobstructed forward reach range of 15 to 48 in from the finished floor, which caps an accessible hook at 48 in.
- VASAGLE UHSR415 published specification — 13.8 D x 38.6 W x 70.9 H in, 220 lb static bench load, 33 lb per mesh shelf, 11 lb per hook, particleboard and steel, 2 anti-tip kits included. Mirror dimensions not published.
Read next
Where to go from here
The full hall tree roundup
Where this piece sits against seven others, ranked on published ratings.
Hall tree dimensions
Standard heights, hook heights and the ADA reach range that caps them.
Entryway storage with hooks
How many hooks a household needs, and at what heights.
A bench-style hall tree instead
The same job in 11.8 inches of depth, with no tower above it.